This ro drinking water SYSTEM INCLUDES :

System Includes Your choice of 2 tank sizes TO FIT YOUR NEEDS:

• 1.5 Gal capacity - 12 5/8"H X 8" Diameter Tank

• 3.2 Gallon Capacity - 15" high X 11" Diameter

or an optional 14.0 gallon tank

• 14.0Gallon - 15-3/8" DIA x 23-3/16" HGT ($150.00 +shipping)

Each tank comes with a stand which allows it to stand tall or you can lay it on its' side.

AMTROL's pioneering diaphragm design provides the longest life and the most complete water discharge

 

Fully enclosed polypropelene and butyl water reservoir ensures water purity
 

Longest lasting charge in the industry
 

These durable steel tanks are built to last!

NSF Steel Tank.

IN-LINE BATTERY POWERED DUAL DIGITAL TDS METER!

• Measures the tap water feed  vs. the purified water being produced by your RO System.

• Use the meter to determine the quality of your drinking water and have assurance that the RO membrane is functioning properly.

• Displays "real time" TDS levels of the Feed Water and Product Water with "in & out" electrode probes.

• Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.

Read The Facts About TDS Here:

Why is measuring the Total Dissolved Solids (TDS) in your water so important?

Connectors for quick, easy, leak free connections.

Your choice of 6 faucet* colors with or without air gap:

• Chrome w/black accents

• Brushed Nickel (Satin Stainless Look)

• All White

• All Almond

• All Black

• All Brass

*All faucets meet lead-free requirements.

Made With Premium Quality Filter Housings

Heavy duty construction, made entirely of the highest quality FDA grade NSP listed polpropylene.  Housings and EPDM o-rings, rated for temperatures to 125º F (52ºF) and pressures to 125 psi (8.75 bar).  Cap, sump and top-seated o-ring compress to provide leak proof sealing. Superior sealing and security with thread buttress design.   Thick side walls with heavy-duty ribs provide added strength.

NO PLUMBER REQUIRED!

A quick-connect faucet adapter is supplied with this system.  Attach the feed water supply in minutes!

YOUR CHOICE OF 3 CODE LISTED DRAIN LINE

ADAPTERS!

The DLA-12 Reverse Osmosis Drain Line Adapter can be used anywhere a drain saddle is typically installed under-counter, providing a code-listed solid professional connection.

The DLA-9 Reverse Osmosis Drain Line Adapter solves an RO installation problem that nothing else can.   The DLA-9 converts the plumbing of a single sink with disposal to receive the reject water from an undercounter reverse osmosis appliance or a distillation system which has an automatic backwash feature.

The DLA-D Universal Drain Line Adapter is designed for installation on all garbage disposals where the dishwasher drain inlet is located.  The DLA-D provides a code listed alternative to the use of the drain saddle for fast easy installation on all disposals.

Read Code Information HERE

 

Do it Right

Do it to Code

"The Smart Alternative to the Drain Saddle"

• Product water production:....38.5GPD Average (1.6 gallons/Hour)
• Average system recovery:.....24.6% (approx: 1 gallon RO / 3 gallons waste
• Water supply:...............Well or Municiple (chlorinated or non-chlorinated)
• Water pressure:...........30-100 psi
• Water temperature:.....40-100' F
• Daily production:..........50 Gallons (Max)
• Pre-filters:...................Sediment & Carbon
• Membrane:..................Thin Film Composite (TFC)
• Post filter:....................Activated Carbon
• pH range:.....................3-11
• Maximum TDS:..............2000 ppm         
• TDS rejection:...............90-95%
• Storage tank capacity:...3.2 Gallons
• Dimensions (unit/tank):.16" X 14" X 6" / 11" X 15" dia.
• Shipping weight:............32 lbs.

• Maximum feed TDS:.................2000 ppm
• Maximum iron:.........................0.3 ppm
• Maximum hardness:.................12 GPG
• Maximum hydrogen sulfide:.......0
• Maximum manganese:..............0.05
• Maximum turbidity:...................1 NTU
• Pressure:.................................30-100 psi (min/max)

* This RO System is not intended for use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before the unit. This drinking water system must be maintained according to the manufacturer's instructions (included), including replacement of cartridges and membranes.
 

CLICK HERE for this RO Systems' FAQ"S

CLICK HERE to download the Installation Manual  for this System. (592 KB  Adobe^® PDF)

CLICK HERE for information about: Bottled Water VS. This RO System.....

Where does you water come from? -  For EPA & Various Industry links

TDS (Total Dissolved Solids) "rejection rate" and your RO system.

The quickest, easiest way to determine if your RO system is operating properly is to measure the TDS of the feed water vs. the TDS of the product water.  A typical residential membrane will reject 90-95% of the feed water TDS and leave your product, (drinking),water very pure. 

For example, if your feed water contains 200 ppm TDS, your RO water TDS should be between 10-20 ppm TDS.

The digital TDS monitor that is supplied with our ROpure550^®  residential drinking water purification system will allow you to monitor and calculate the salt (TDS) rejection % of the RO membrane. 

SEE SYSTEM FAQ's for more details on this subject.

TAKE TIME TO COMPARE....not all residential RO systems are the same!

• TRUE - 5 STAGE FILTRATION - This system contains FIVE filter housings, (3) prefilter housings, (1) RO membrane housing, and (1) polishing filter housing. 

• Clear pre-filter housing allows you to see the first stage filter and takes the guess work out of filter changing.

• We build the system with a 3/8" - TANK TO FAUCET CONNECTION, for a "robust" flow when you turn on the faucet.  (you'd be surprised at how much of a difference this makes in the amount of flow from the faucet!). 

• Built with John Guest Speedfit NSF Connectors throughout the ENTIRE system,  makes installation AND maintenance very easy and fast .

• Includes a Code Listed Drain Line Adapter.

• Includes High quality, extremely accurate digital TDS meter, built into the system, allows you to monitor the systems' rejection rate in "real time".

• System includes your choice of a 1.5 gallon capacity, (12 5/8"H X 8" Dia.) or a 3.2 gallon capacity, (15" high X 11" Dia.) High quality steel,  Amtrol brand, NSF storage tank.

• Your choice of popular Long Reach Faucet colors by Touchflo!.  Air Gap option also available on faucets for a small additional cost.

• System can be very easily upgraded at any time to 100 GPD (4 gals./hr) production. (some additional charges apply)

• Heavy duty Filter Housings, made entirely of the highest quality FDA grade NSP listed polpropylene.

• Pre-filters (NSF listed Components)
  Spun polyproplene and NSF solid block and coconut shell, activated carbon cartridges to remove sediment, taste and odors.

• High rejection (up to 98%), GE Osmonics^{® NSF} Membrane produces up to 2 gallons/hour* while removing up to 98% of the harmful contaminants, metals and salts to provide healthful drinking water. Download Membrane Specs HERE

• Post filter (NSF Component)
  Coconut shell activated carbon to "sweeten" up and Polish the water to absolute, palatable perfection! Used after the RO membrane for great tasting water.

• The system is built on a heavy duty, powder coated steel frame with stainless steel hardware. 

• We build our own systems to order.  We do not purchase them pre-built, in large quantities from overseas. 

• We use nothing but the highest quality components available in the industry.

• EVERY unit is factory pressure tested for the proper auto shut-off function at various pressures, proper RO rejection rate and leaks, prior to shipment.

• All of the components in this system are considered "industry standard," from the fittings to the filters.  There are no proprietary parts used.  What does this mean for you?  In short, while we certainly would appreciate your repeat business, you will not be "married" to us for replacement  filters and membranes,  they are readily available in many other locations.

* Test conditions - 60psi, 77˚ F, 500mg/l NaCl feed, 50GPD membrane.  100GPD ( 4 gallons/hour) 96% rejection rate membrane available as an option.

This water filter system is built with - made in the USA components and materials that are:

•  Certified by NSF, Standard 58 and

• U.S. FDA approved